Bookmark this site!
1320drag is the #1 DragRacing and Motorsport discussion forum online.

Go Back   1320drag.net -#1 source for drag racing videos & racing content

View Single Post
Old 12-20-2005, 01:29 AM   #1 (permalink)
BoJangles
1320.net Newbie
 
BoJangles's Avatar
 
Join Date: Nov 2005
Location: TORONTO
Posts: 176
Famous Strokerace Quotes - Part I

On how much it costs to make a Civic go 10's...

Quote:
Originally Posted by Strokerace
Hmm, I don't see you need alot of money for a drag car. They are cheap to build. Once you have the shell, the rest is easy. It shouldn't cost no more then $7000 to take your civic to full race car doing 10's.
On what the best VW motor is...

Quote:
Originally Posted by Strokerace
Sucks to be you. I would't waste any money on a VR, they are shit engines. Better off doing a 1.8 or use an old air cooled motor. These will beat any other VW motor around.
On seeing a fwd CRX with a wheelie bar...

Quote:
Originally Posted by Strokerace
The funniest thing with alot of these pictures, is seeing FWD cars with wheelie bars. Its virtually impossible for these car to flip over.
Quote:
Originally Posted by Strokerace
Please, enlighten me. All I can see is some half wit wantabe cool looking FWD putting bars on it because it makes their car looks cool instead of learning to design the car properly.
Quote:
Originally Posted by Strokerace
This is what they think they are doing by adding these, but they are not needed. Anybody with half an IQ can figure that out.

First off, if they knew anything about a FWD car, they would not remove the weight front the front of the car.

Second, they can make a reverse type ladder bar style hook up for the front.

Thirdly, this is so easy to do, even a chimp can figure this one out, limit the amount of travel in the front and rear suspension. These are drag cars, not grocery getters. So who cars about the feel of comfort when doing a 150mph, these cars are almost floating at these speeds.


Children, all of them. couldn't make a tricycle go fast and straight if their lifes depeneded on it.
Quote:
Originally Posted by Strokerace
You can also tell them, I can shave a full second off of their car by removing the useless wheelie bars. and another .5 sec off the time if I drive it.

On how fast he is...

Quote:
Originally Posted by Strokerace
last time I went down the 1/4 was last friday in st. thomas did a 10.50 pass on the rebuilt motor. That was the track. I race on the street almost every other day.
On whether or not race cars have serial numbers...

Quote:
Originally Posted by Strokerace
Bullshit, there is no chassis builder that numbers the frame you moron. You must of just fell off the tur*** truck to believe or even say that. I can take you to ever car in the cascar, players series and show you that there is no VINs, or numbers on the chassis
On who BoJangles is....

Quote:
Originally Posted by Strokerace
Maybe its time to take your own advice and come clean. You seem to know alot about the people here, but no person here seems to know you with the exception of me. So, without blowing your cover, I will leave you all with this. This person is using a second account, and has meet probally most of you here, has never meet me, but has talked to me on MSN.
On a stock Ford 302 revving to 8500rpm....

Quote:
Originally Posted by Strokerace
Ok, if he won't I will. When the **** are you going to wake up and smell the damn coffee. Anybody with half an IQ point knows that a 302 has no problems screaming to 8500.
His little mental breakdown drama....

Quote:
Originally Posted by Strokerace
Here are some facts, You are total ****ing asshole and know sweet **** all. You can't read, can't build a car from the ground up, you can't come up with your own chassis and engine builds. ****, take every ****ing brain dead asshole on this site and add their IQ's together and the combine IQ is still 3 IQ point lower then a rock. Each and everyone of you brain dead ****s, go back and read every, thing that you posted, what I posted. Add it all up, and not one of you ****ing losers on this site can build your way out of a wet paper bag. I have given everyone here the oppertunity to prove me wrong and only one, thats right one can close to it. I said if he could show me a chassis number from a builder, yes he did that, but he did not provide any paper work to back up that it was A VIN. Until one of you useless pieces of shit can ****ing build a car that be beat, I would suggest you all shut your worthless traps before its shut for you. There is only a few members here that will get my respect, they include,B6T, Sirchirpalot, Rougevette,Babytish.The rest of you will never get my ****ing respect. I have been nice to all of yous, but not no more. Consider this your last ****ing time for seeing.
Quote:
Originally Posted by Strokerace
Nope, this has nothing to do with that. Its personal issues that I have to deal with. I just wanted to go out with a bang that is all. I also wanted the nick disabled as I didn't want anyone to use it and make my rep look good, or have you wolves tear them apart thinking it was. No, I am not going to jail or anything like that. I will be honest with you all on this one. I am on the verge of a mental break down.
On him knowing about GM...

Quote:
Originally Posted by Strokerace
And for your GM comment, yes, I do know more the the GM team.

PART II COMING SOON AS WELL AS A SIRCHIRPALOT QUOTES POST
SOMEONE PASTE ME HIS QUOTE ABOUT CARS NOT NEEDING TO BE TUNED ON A DYNO AND ILL ADD IT
BoJangles is offline   Reply With Quote
 
Affiliates

» Market Place
F1 stage 3 clutch kit 12 lbs flywheel 90 96 300zx turbo
Last post by Turbo Kits
Today 10:38 AM
0 Replies, 1 Views
90 01 Integra CRX Del Sol B16 B18 T4 T04E Turbo Kit S
Last post by Turbo Kits
Today 10:38 AM
0 Replies, 1 Views
Nos 10 lb nitrous bottle valve assm brackets kit nob
Last post by nitrous kits
Today 10:38 AM
0 Replies, 1 Views
Porsche 911 65 73 Stainless Exhaust Muffler Tip New
Last post by Muffler Man
Today 10:38 AM
0 Replies, 1 Views
03 04 05 06 07 honda accord 4cy catback exhaust muffler
Last post by Muffler Man
Today 10:38 AM
0 Replies, 1 Views
Powered by vBadvanced CMPS v3.0.1

All times are GMT -5. The time now is 10:48 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
CAS Girl Pictures Model Train Forum
Page generated in 2.36495 seconds with 11 queries