Bookmark this site!
1320drag is the #1 DragRacing and Motorsport discussion forum online.

Go Back   1320drag.net -#1 source for drag racing videos & racing content

Thread: 9 Second Supra
View Single Post
Old 11-21-2007, 05:17 AM   #1 (permalink)
EK_Nine
1320.net Newbie
 
Join Date: Nov 2007
Posts: 27
9 Second Supra

The JZA80 twin-turbo Supra is arguably the best import-performance vehicle to be sold in the United States. For brothers Tony and Kyle Nino, the Supra was their dream car. Older-brother Tony purchased this Supra in June of 2005 with the intent of building a 700-horsepower, daily-driven street monster. During the course of the project, the performance bar was set at running 9s and generating 1000 wheel horsepower. Unfortunately, Kyle was killed in a motorcycle accident a few months ago. In memory of his late brother, Tony decided to continue the build in his brother's memory.

The Powerplant

There's more ways than one to skin a cat and there's obviously more than one performance combination that can make the 2JZ engine sing. To meet the original 700-horsepower goal, a buildup was done with the HKS 2835 twin-turbo system. This system performed flawlessly with the complementary components and stock engine. On race gas, Tony Claims this setup yielded 750-wheel horsepower while delivering 10.8-second performance on BFG drag radials. While running 10s is quite an accomplishment, the plan was set in motion to build a combination that would produce the power to run 9s. Working with DynoXtreme of Stanton, California, the 9-second powerplant was built.

The engine that is now between the shock towers has been build to survive at the 1000-horsepower level. The factory crankshaft is now set in driven by 8.5-to-1 forged aluminum CP Pistons and Carrillo 4340 forged-steel connecting rods. Up top, the cylinder head has been reworked to accept +1mm Supertech valves, Crower valve springs and Crower retainers. HKS 272 camshafts orchestrate the valve events while ARP Fasteners head studs secure the head to the block.

Boost and Fuel

To provide the airflow for the big-power numbers, a Virtual Works turbo manifold feeds the single PTS-76 turbocharger a steady supply of exhaust gas. After the exhaust has powered the turbo, a four-inch downpipe directs the fumes through a HKS Hiper Titanium exhaust. Once the desired boost level is reached, an HKS GT2 wastegate directs surplus exhaust gas to the atmosphere. On the cold side, this turbocharger sends its compressed flow to a GReddy front-mount intercooler. Once chilled, the charge air is directed into the cylinder head by a VeilSide intake manifold featuring a 100mm throttle body.

To provide the fuel for the fire, a pair of Walbro in-tank 255lph pumps transfers the fuel from the tank to the fuel rail. These pumps feed a half-dozen 1000cc/min RC Engineering injectors. Currently, the injectors take cues from a G-Force modified factory ECU receiving signals from an HKS VPC and an A'PEXi S-AFC. According to Tony, he's planning on swapping over to a Power FC or AEM EMS stand-alone engine-management system in the very near future

Control Systems

An RPS carbon-carbon twin-disc clutch system regulates the power application to the TRD limited-slip differential. This differential sends equal power to each of the Toyo 315/25R19 rear tires mounted on the VeilSide Andrew Racing Evolution V rims. These rims spec to a 11.5-inch width in the rear and a 9.0-inch width in the front. All four tires deliver an improved contact patch thanks to suspension upgrades from TEIN and TRD. The TEIN HA coilovers work to maximize the contact patch while TRD sway bars keep body roll to a minimum.

A trio of GReddy black face gauges and an AEM wide-band UEGO gauge display engine vitals to the driver. The HKS EVC EZ2 electronic boost controller can easily be set to optimize the boost levels on 91-octane or 117-octane C16 racing gas.

Good to Go, Made for Show

Purpose-built show cars make little sense to performance enthusiast. However, there's never anything wrong with making your streetcar stand apart from the crowd. To personalize this Supra, a combination of various body components were selected. A C-West front bumper ties in with VeilSide C1 side skirts and rear bumper. A Do-luck rear diffuser and Top Secret hood complete the body tuning package. While never part of the original plan, Tony admits that he did spend a good deal of time on the exterior and interior of the Supra as he participating in a number of local car shows.
EK_Nine is offline   Reply With Quote
 
Affiliates

» Market Place
02 07 WRX STi Turbo Front FMIC Intercooler Piping Kit
Last post by Turbo Kits
Yesterday 10:54 PM
0 Replies, 3 Views
10cc KIT TURBO TEETH WHITENING TOOTH BLEACHING WHITENER
Last post by Turbo Kits
Yesterday 10:54 PM
0 Replies, 3 Views
MISHIMOTO Radiator Silicone Hose Kit Eclipse Turbo 2G
Last post by Turbo Kits
Yesterday 10:54 PM
0 Replies, 3 Views
97 05 audi a4 quattro vw passat 1 8l turbo clutch kit
Last post by Turbo Kits
Yesterday 10:54 PM
0 Replies, 3 Views
Turbo XS RFL Blow Off Valve WRX Bolt On Flange Kit
Last post by Turbo Kits
Yesterday 10:54 PM
0 Replies, 3 Views
Powered by vBadvanced CMPS v3.0.1

All times are GMT -5. The time now is 03:46 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
CAS Girl Pictures Model Train Forum
Page generated in 1.31037 seconds with 11 queries