from another forum....
| Quote: |
Setup:
Stock D16Y8 block
ARP headstuds
RC440's
ZEX 59300 cam
ACT Xtreme PP w/stock disc
5lb. lightened stock flywheel
Uberdata
Greddy TD04-15G @ 15 PSI of boost
OBX LSD
Stock axles
205/50-14 BFG G-force drag radials @ 12 psi
Race weight: 2070 lbs w/ me in it. (I weigh 170)
The motor had started smoking out of the valve cover breather the night before at the track because of leaning out in 4th. (fuel delivery problem).
It compression tested at 210-220-210-160 the morning of BOTI.
So, #4 was hurt, but I really wanted to run at BOTI so I did anyway. And it pulled some awesome times! Consistent 12.2's @ 114, and a couple 12.1's. And FINALLY a 12.0!! I am so happy!
Since I don't really care for the Y8, I am going to put a rebuilt stock Z6 in it and try for the 11.99 sec mark w/the Greddy kit and a stock block on drag radials.
This has been my goal for 2 years now, and it's so close I can taste it!
|
|
[IMG]http://www.*****************/forum/images/wMTA1MTIxMjZzNDEzZGZkMzF5NTQx.jpg[/IMG]
[IMG]http://www.*****************/forum/images/wMTA1MTIxMzZzNDEzZGZkMzF5NTQx.jpg[/IMG]
[IMG]http://www.*****************/forum/images/wMTA1MTIxNDZzNDEzZGZkMzF5NTQx.jpg[/IMG]
[IMG]http://www.*****************/forum/images/wMTA1MTIxNjZzNDEzZGZkMzF5NTQx.jpg[/IMG]
[IMG]http://www.*****************/forum/images/wMTA1MTIxNTZzNDEzZGZkMzF5NTQx.jpg[/IMG]
[IMG]http://www.*****************/forum/images/wMTA1MTIxODZzNDEzZGZkMzF5NTQx.jpg[/IMG]
1320drag
